Contact Us

Qingdao Weiketerui Automation Equipment Co., Ltd
 TEL: 0086-532-66960231
 MOB: 008618562800715
 Skype: amy_5310
 E-mail: amy@wtr-bearing.com
 Address: Wanxing International Hardware City, Qingdao, Shandong, China

    

High Performance 3.5KVA 380V Diameter 20mm to 150mm Movable Bearing Induction Heater

The high performance movable bearing induction heater model is WTR-3.5-3, which is used for bearings,couplings,gear,bushings,sleeves and other working pieces with an inner diameter from 20mm to 150mm.

Application

Applied to motor,railway, petroleum machinery, steel, wind power and other industries. Proper bearing installation is essential to safeguard maximum bearing life.

Characteristics

1. Automatic demagnetization: <2A/CM

2. Insulating material shell, safe and reliable using process;

3. Time control: 0-99 minutes, Temperature control: 0-300℃;

4. Different size yokes optional : 14mm,20mm,28mm,36mm,48mm,63mm;

5. Certifications: CE, ISO9001, EMC,FCC.

Technical parameters

Model

WTR-3.5-3

Power

3.5KVA

V/HZ

380V/50HZ 

Currency

20A

Pole area

65*70mm

Pole height

265mm

Max. weight of the workpiece

20KG

Bore size of the workpiece

20mm

Max. out size of the workpiece

350mm

Max. width of the workpiece

160mm 

Temperature Control

- Highest

- Magnetic probe

- Digital display

300℃

PT100

Yes

Time Control

- Time range

-  Digital display

 

0-99’

Yes

Demagnetization standard

Automatic demagnetization <2A/CM

Heater Dimension(mm)

740*380*780mm

Heater weight

80kg

Yoke iron core cross section (mm)

Optional

20x20x300 ; 14x14x300

48x48x370 ; 36x36x370

28x28x300 ; 63x63x370

Heater style

Movable

Product advantage

Quality guarantee from every detail

(1) 100% high quality copper induction coil;

(2) Temperature -10 ℃ -400 ℃ insulation double glass envelope technology;

(3) Military standard 35W270 high silicon steel sheet;

(4) Schneider electrical accessories; 

(5) Temperature -50℃-300℃ epoxy rods platinum thermal resistance.

Multiple protection makes it safer and more environmental

(1) Fully enclosed insulated coil minus the risk of the exposed coil;

(2) E multilayer fiber ribbon;

(3) F grade epoxy insulating paint;

(4) Special processing technology minimize the radiation and noise;

(5) WTR 300-500℃ temperature-resistant insulated gloves.

FAQ

1. Q: What test we will do before the machine leave factory?

A: Before machine leave factory, our engineer will mainly test the following 3 parts.

(1) Test the currency to be standard

(2) Test the demagnetization effect to be standard

(3) Test the noise, <85DB within one meter.

2. Q: How to operate the bearing heater?

A: Each bearing heater is with a operating manual, operating video is also available.

3. Q: How to guarantee our machine to be safe?

A: Bearing heater raw material & technology

(1) Fine copper coils, more heat insulation

(2) -10℃~400℃ insulation double glass envelope technology

(3) Electrical accessories are from Schneider

(4) Temperature -50℃-300℃ epoxy rods platinum thermal resistance,better magnetic properties

(5) Fully enclosed insulated coil

(6) E multilayer fiber ribbon, F grade epoxy insulating paint, multiple protection

(7) Special processing technology makes the radiation and noise to be minimum

(8) WTR brand temperature-resistant insulated gloves

(9) Each WTR bearing induction heater passed the CE, ISO9001, EMC,FCC.

4. Q: How about the operation precautions for safe?

(1) Bearing induction heater will produce an induction magnetic field which will influence or weaken the effect of the medical device such as pacemaker or hearing-aid, thus it will hurt health. Please do not operate the machine or stay within 5m away from the machine when wear such device.  

(2) Do not operate the induction heater in area existing explosion hazard.

(3) It is very important to conduct correct maintenance and handling. It will cause machine fault or have personal injury if operate out of user manual.

(4) Sensitive electronic equipment(such as mobile, watch, computer) will be influenced by the magnetic field, do not use them around the heater.

(5) Check whether the power and voltage are accordance with the heater nameplate, confirm the ground connection is good.

(6) Avoid touching the heated bearing directly, please use high temperature resistant gloves to carry the bearings.


Rely on the excellent product quality and thoughtful professional service, WTR brand bearing induction heater has been appointed as sole supplier by Fortune 500.

图片4.png

图片5.png


Welcome to buy the high performance 3.5kva 380v diameter 20mm to 150mm movable bearing induction heater made in China from our factory. We are one of the first and leading bearing heater manufacturers and suppliers in China. Please be free to enjoy our discount price and good service.

Related Products
Inquiry