Products
5.0KVA Induction Bearing Heater Tool
video
5.0KVA Induction Bearing Heater Tool

5.0KVA Induction Bearing Heater Tool

1.Portability, precise temperature control and flexible adaptability make it an efficient solution for small workpiece installation or on-site maintenance.
2.Especially for scenes that require quick response and mobile operation,significantly improving work efficiency and reducing the risk of assembly damage.
Welcome to contact us.

Shandong Weiterui Industrial Technology Co., Ltd. is one of the leading manufacturers and suppliers of 5.0KVA Induction Bearing Heater Tool in China. Welcome to buy high quality bearing heaters made in China here from our factory. Please be free to enjoy our discount price and good service.

 

5.0KVA Induction Bearing Heater Tool

Controlled bearing heating for workshop mounting and maintenance.

The 5.0KVA Induction Bearing Heater Tool heats bearings before interference-fit mounting. Its 5.0 kVA rating, 220 V supply and maximum bearing weight of 65 kg make it a practical option for motor repair, pump maintenance and machinery assembly, provided the bearing dimensions fit the heater.

5.0 kVA   /   220 V   /   Up to 65 kg   /   Automatic demagnetization

Temperature and time control, a digital display and vertical or horizontal heating help operators prepare bearings for mounting.

 

 

What Is an Induction Bearing Heater?

An Induction Bearing Heater Tool uses an alternating magnetic field to induce electrical currents in a metal bearing. These currents generate heat within the bearing. Controlled heating expands the bearing bore temporarily, allowing the bearing to slide onto a shaft with an interference fit.

This mounting process reduces the need for heavy force during installation. The operator selects a suitable temperature, monitors the bearing with the temperature probe and mounts it after the heating and demagnetization cycle is complete.

The 5.0KVA Induction Bearing Heater Tool uses a coil, magnetic core and removable yoke to form the heating circuit. It heats without an open flame or an oil bath.

Main Applications of the 5.0KVA Induction Bearing Heater Tool

Application Typical bearing mounting task
Electric motor repair Prepare replacement bearings for mounting on motor shafts.
Pump and fan maintenance Heat bearings for assembly during pump, blower and industrial fan servicing.
Gearbox and transmission assembly Prepare suitable bearings for installation in industrial gearboxes and drive systems.
General machinery maintenance Support bearing replacement and assembly in factory maintenance workshops.

The main use is bearing heating for mounting. Steel gears, sleeves and other ring-shaped parts may also be suitable after WTR checks their material, weight, geometry and heating requirements. The 65 kg rating applies to bearings and should not be treated as a universal capacity for other components.

Why Choose the 5.0KVA Induction Bearing Heater Tool

Capacity for workshop bearings

The maximum bearing weight is 65 kg. Vertical and horizontal placement provide options for different bearing geometries, within the dimensional limits shown below.

Temperature and time control

Choose temperature control for a target bearing temperature or time control for an established heating procedure. The specified temperature control range is 0–300°C and the time control range is 0–9999 seconds.

Automatic demagnetization

Automatic demagnetization reduces residual magnetism after heating. The specified residual magnetism level is <2 A/cm.

Digital display and cycle signal

The digital display provides operating information, and an acoustic signal indicates the end of each heating cycle.

Yokes for different bearing bores

Four listed yoke sizes help accommodate different bores. The yoke must fit through the bore and sit correctly on the heater poles. Select the largest suitable yoke for the workpiece.

Optional functions: temperature hold and automatic power reduction are optional configurations. Confirm these requirements when requesting a quotation.

How to Choose the Right Power Rating

Choose an Induction Bearing Heater Tool by the bearing dimensions, weight, mounting temperature and required heating cycle. Power rating alone does not confirm whether a bearing will fit or how quickly it will heat. The 5.0 kVA rating is an electrical apparent-power rating, not a 5.0 kW heating-output claim.

1. Check the bearing weight and dimensions

Measure the bearing bore, outside diameter, width and weight. All relevant limits must be met in the selected heating position. Do not combine the vertical and horizontal limits into one operating envelope.

Bearing limit Vertical position Horizontal position
Maximum bearing weight 65 kg 65 kg
Minimum bore diameter 20 mm 150 mm
Maximum outside diameter 400 mm 450 mm
Maximum width 145 mm 160 mm

2. Check your workshop power supply

This configuration requires 220 V, 50/60 Hz and has a specified current of 23 A. Confirm the supply, connection and circuit capacity before ordering. A standard low-current socket may not be suitable.

3. Confirm the heating temperature and workload

Provide the target temperature, bearings per day and required heating time. Heating performance depends on the bearing mass, geometry, yoke size and starting temperature. The maximum weight rating does not guarantee a particular cycle time.

Power rating Maximum bearing weight Supply Selection starting point
2.2 kVA 30 kg 220 V Compare for lighter bearings if their dimensions fit.
2.5 kVA 12 kg 220 V Compare for smaller bearings and compact bench space.
3.6 kVA 50 kg 220 V Compare when the bearing fits the 50 kg capacity and its dimensional limits.
5.0 kVA 65 kg 220 V Consider for bearings within this page's capacity and dimensional limits.
8.0 kVA 100 kg 380 V Compare for heavier bearings when the required supply is available.

These are starting points from the product range specifications. Each power option has its own dimensional limits. For example, the 2.5 kVA option has a lower maximum bearing weight than the 2.2 kVA option, so a higher kVA number does not automatically mean a higher bearing capacity.

Choose the 5.0KVA Induction Bearing Heater Tool when: your bearings fit its 65 kg capacity and the relevant dimensional limits, your workshop has a suitable 220 V supply, and the heating performance meets your assembly schedule.

Technical Specifications

Parameter Specification
Product name 5.0KVA Induction Bearing Heater Tool
Rated apparent power 5.0 kVA
Voltage 220 V
Current 23 A
Supply frequency 50/60 Hz
Maximum bearing weight 65 kg
Minimum bore diameter, vertical / horizontal 20 / 150 mm
Maximum outside diameter, vertical / horizontal 400 / 450 mm
Maximum bearing width, vertical / horizontal 145 / 160 mm
Horizontal heating Supported
Pole cross-section 50 × 50 mm
Pole height 165 mm
Pole distance 145 mm
Display Digital
Temperature probe 1 magnetic probe
Temperature control range 0–300°C
Time control range 0–9999 seconds
Automatic demagnetization Yes; residual magnetism <2 A/cm
End-of-cycle acoustic signal Yes
Temperature hold Optional
Automatic power reduction Optional
Listed yoke dimensions 14 × 14 × 295 mm; 20 × 20 × 295 mm;
28 × 28 × 295 mm; 45 × 45 × 295 mm
Heater dimensions (L × W × H) 560 × 320 × 300 mm
Approximate heater weight, excluding yokes 37.4 kg
Listed package dimensions 640 × 420 × 480 mm

The temperature control range is the equipment specification. The correct mounting temperature must follow the bearing manufacturer's guidance, including limits for grease, seals and shields.

Accessories for the 5.0KVA Induction Bearing Heater Tool

5.0KVA Induction Bearing Heater Tool accessories photo

Basic Operating Procedure

  1. Check the bearing dimensions, weight and permitted mounting temperature.
  2. Place the heater on a stable surface and connect it to a suitable power supply.
  3. Select a suitable yoke, position the bearing and ensure correct contact between the yoke and poles.
  4. Attach the temperature probe as instructed in the operating manual and select temperature or time control.
  5. Start heating and allow the heating and automatic demagnetization cycle to finish.
  6. Use suitable heat-resistant gloves and handling equipment to remove and mount the bearing promptly.

Use the operating manual for the complete setup and safety procedure. Sealed or shielded bearings require confirmation of the allowable heating temperature and monitoring of their seals, shields and lubricant.

Technical Support and After-Sales Service

WTR provides a 1-year warranty under normal use, lifetime remote video support, operation training and technical consultation. Sensors, yokes and other spare parts are available. Confirm the warranty coverage and accessory supply in your quotation.

Frequently Asked Questions

What does 5.0KVA mean?

It identifies the rated apparent power of the 5.0KVA Induction Bearing Heater Tool. It helps define the electrical supply requirement. Bearing capacity and heating time also depend on the heater design and the workpiece.

Is this equipment used for bearing mounting or removal?

The main application is heating bearings before interference-fit mounting. For bearing removal, contact WTR with the assembly details so the appropriate heating solution can be assessed.

Can it heat every bearing weighing less than 65 kg?

The bearing must also fit the bore, outside diameter and width limits for the selected position. WTR can check suitability using a bearing designation or a dimensioned drawing.

Can sealed or shielded bearings be heated?

They may be suitable if their construction and manufacturer's temperature limits permit heating. Confirm the limits for the seals, shields and grease before use.

Should I set the bearing temperature to 300°C?

No. The 0–300°C specification is the equipment control range. Use the mounting temperature permitted by the bearing manufacturer. Seals, grease and bearing materials may require a much lower limit.

How long does one heating cycle take?

Cycle time depends on bearing weight, geometry, starting temperature, target temperature and yoke selection. Send these details and your required cycle time for a performance assessment.

Does it demagnetize the bearing automatically?

Yes. The 5.0KVA Induction Bearing Heater Tool includes automatic demagnetization, with a specified residual magnetism level of <2 A/cm.

What should I send to select the right power rating?

Send the bearing designation or drawing, bore diameter, outside diameter, width, weight, target temperature, available voltage, quantity per day and required heating time.

Confirm Your Bearing Heating Requirements

Need to confirm whether the 5.0KVA Induction Bearing Heater Tool fits your application?

Send WTR your bearing designation or drawing, dimensions, weight, target temperature, available voltage and daily workload. We will check fit, power requirements, yoke selection and the configuration for your mounting process.

Hot Tags: 5.0KVA Induction Bearing Heater Tool, China, factory, suppliers, manufacturers, price, buy discount, made in China, portable bearing heater for power generation industry, 5KVA Portable Induction Bearing Heater With High Quality, pharmaceutical industry portable bearing heater, portable bearing heater for different industries, 3 6KVA Portable Induction Bearing Heater With High Quality, portable bearing heater for warehousing industry

Send Inquiry