Things to note when selecting large bearing heaters
Large bearing heaters are often used in wind power, mining, heavy industry and other industries that use large bearings. The installation process of large bearings is complicated due to their large size and mass. According to the characteristics of large bearings, this article briefly elaborates on the considerations for selecting large bearing heaters.
1: Convenience of operation, this is very important, because large bearings generally need to be hoisted, so when designing the bearing heater, it should be considered that the bearing is easy to place on the heater. Moreover, because the heating rod of the heater is made of silicon steel sheets, the heating rod of the large bearing heater is very heavy and is inconvenient to operate manually. Therefore, the movement and replacement of the heating rod must be considered in the model design.
2: During the heating process of large bearings, temperature differences are prone to occur due to their large size. When selecting a bearing heater, be sure to communicate with the manufacturer about the requirements for the temperature difference between the upper and lower bearings and the temperature difference between the inside and outside of the bearing to avoid bearing installation and bearing accuracy being affected by excessive temperature differences.
3: Heating time requirements, the heating time of large bearings is usually longer. Therefore, when selecting a model, you must choose the corresponding power according to the heating time. If the power is selected incorrectly, the heating time may be very long, or the heating time may not even reach the required temperature.
4: The large bearing heater must be placed in the workshop away from other equipment with instruments, otherwise other equipment may not be able to use normally due to the magnetic field. In addition, due to the characteristics of electromagnetic induction, people with metal such as steel plates and brackets in their bodies are strictly prohibited from approaching such equipment.
WTR always adheres to the core values of "customer centeredness". practices the corporate mission of "pursuing the material and spiritual happiness of all employees, creatingvalue for customers with electromagnetic induction heating technology, and revitalizing na.tional industry", and continuously strives to achieve the vision of "becoming the preferredbrand in the electromagnetic induction heating industry in the industrial field". WTR hasalways maintained high standards in product quality, technological innovation, and pre-salesand after-sales service, lt is not only a professional and cost-effective manufacturer of elec-tromagnetic induction heating equipment, but also a provider of reasonable solutions andcomprehensive services.
