Hot Selling Bearing Induction Heater

Once upon a time, you would be at a loss when installing bearings or other annular workpieces. Today I recommend you to use the WTR-PIH3600 bearing heater.

Under what circumstances can the WTR-PIH3600 bearing heater be used? If the minimum inner diameter of your heated workpiece starts from 20mm, the maximum outer diameter is within 480mm, the maximum width is within 175mm, and the maximum weight does not exceed 50kg, then you can choose this Model, but this size range is limited to the bearing workpiece. If it is other workpieces, such as couplings, gears, flanges, etc., they need to be selected according to specific materials and specifications. For bearing heating, around 110 degrees Celsius is enough. For heating other workpieces, this heater can reach a maximum temperature of 300 degrees Celsius, which is enough to meet your installation requirements. Other aspects, such as demagnetization standards, meet the national standard of less than 2A/CM. As long as you follow the operating instructions, automatic demagnetization can be achieved. WTR is a bearing heater manufacturer with a national residual magnetism testing report!
When ordering the popular product WTR-HE3600S bearing heater, please be sure to look for the genuine platform.

The advantages of induction bearing heater WTR-PIH3600:

1.Efficient and energy-saving: The electromagnetic induction heater directly converts electrical energy into thermal energy, with high energy utilization rate. Compared with traditional heating methods such as gas, resistance heating, etc., the energy utilization efficiency is higher, the energy saving effect is better, and it helps to reduce production costs.
2.Rapid heating: The electromagnetic induction heater can heat the heating body to the required temperature in a short time, with fast heating speed, short response time and high production efficiency.
3.Precise temperature control: By adjusting the electromagnetic field parameters and heat treatment process parameters, the electromagnetic induction heater can achieve precise temperature control of the target workpiece, which is beneficial to ensuring product quality.
4.Safety and environmental protection: Electromagnetic induction heaters do not require the use of open flames or smoke, which is beneficial to protecting the environment and has high safety.
5.Wide scope of application: Electromagnetic induction heater is suitable for heating treatment of various conductive materials.
Easy to operate: easy to install and maintain, and simple to operate.

Last but not least,When ordering the popular product WTR-PIH3600 bearing heater, please be sure to look for the genuine platform.